Thread '7.4.42 (X64) -> unusable computer'

Message boards : Questions and problems : 7.4.42 (X64) -> unusable computer
Message board moderation

To post messages, you must log in.

AuthorMessage
Tomas

Send message
Joined: 17 Mar 09
Posts: 8
Sweden
Message 63070 - Posted: 14 Jul 2015, 21:45:47 UTC
Last modified: 14 Jul 2015, 21:46:13 UTC

I have big problems when boinc is running.
I can't use the mouse, the response from the mouse is jerky at best when BOINC is running.
WHen I suspend BOINC, the behaviour is perfectly OK.
I have experimented with various settings in the settings.
Right now I am down to 5 % setting for "Allow calculation when usage is below" (or whatever the english version says, running Swedish localisation of Boinc)
25 % of CPU's and 25% CPU-time, and it still is barely usable.
My specs is:
INTEL I7-4930K@4.1 GHz, 16GB at 1600MHz, RADEON HD5870 on an ASUYS PX79WS MoBO.
W7-64
ID: 63070 · Report as offensive
ProfileJord
Volunteer tester
Help desk expert
Avatar

Send message
Joined: 29 Aug 05
Posts: 15634
Netherlands
Message 63071 - Posted: 14 Jul 2015, 21:56:05 UTC - in response to Message 63070.  

Which projects are you attached to, and which have work?
Is any of them doing work on the HD5870? Because when work is done on the GPU, the exact problems you have can happen, stuttering, slowness of screen refresh, even complete halts. This is why by default BOINC will only use the GPU when the computer is otherwise idle, aka no one at the keyboard/mouse == use GPU for calculations.

If you changed that so that the GPU is used when the computer is in use, these artifacts can happen.
ID: 63071 · Report as offensive
Claggy

Send message
Joined: 23 Apr 07
Posts: 1112
United Kingdom
Message 63072 - Posted: 14 Jul 2015, 21:59:44 UTC - in response to Message 63070.  

Please post the Boinc startup from the Event Log, the first 30 lines or so will do.

Claggy
ID: 63072 · Report as offensive
Tomas

Send message
Joined: 17 Mar 09
Posts: 8
Sweden
Message 63086 - Posted: 16 Jul 2015, 15:25:54 UTC

Projects (currently running)
Rosetta
Einstein
Seti

No work:
Aqua
LHC
WCG

2015-07-16 16:05:27 |  | cc_config.xml not found - using defaults
2015-07-16 16:05:27 |  | Starting BOINC client version 7.4.42 for windows_x86_64
2015-07-16 16:05:27 |  | log flags: file_xfer, sched_ops, task
2015-07-16 16:05:27 |  | Libraries: libcurl/7.39.0 OpenSSL/1.0.1j zlib/1.2.8
2015-07-16 16:05:27 |  | Data directory: D:\BOINC\Data
2015-07-16 16:05:27 |  | Running under account Tomas
2015-07-16 16:05:27 |  | CAL: ATI GPU 0: ATI Radeon HD 5800/5900 series (Cypress/Hemlock) (CAL version 1.4.1848, 1024MB, 991MB available, 5600 GFLOPS peak)
2015-07-16 16:05:27 |  | OpenCL: AMD/ATI GPU 0: ATI Radeon HD 5800/5900 series (Cypress/Hemlock) (driver version 1800.5 (VM), device version OpenCL 1.2 AMD-APP (1800.5), 1024MB, 991MB available, 5600 GFLOPS peak)
2015-07-16 16:05:27 |  | OpenCL CPU: Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz (OpenCL driver vendor: Advanced Micro Devices, Inc., driver version 1800.5 (sse2,avx), device version OpenCL 1.2 AMD-APP (1800.5))
2015-07-16 16:05:27 |  | Host name: TOYBOX
2015-07-16 16:05:27 |  | Processor: 12 GenuineIntel        Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz [Family 6 Model 62 Stepping 4]
2015-07-16 16:05:27 |  | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 popcnt aes f16c rdrandsyscall nx lm avx vmx tm2 dca pbe fsgsbase smep
2015-07-16 16:05:27 |  | OS: Microsoft Windows 7: Ultimate x64 Edition, Service Pack 1, (06.01.7601.00)
2015-07-16 16:05:27 |  | Memory: 15.94 GB physical, 31.88 GB virtual
2015-07-16 16:05:27 |  | Disk: 500.00 GB total, 346.21 GB free
2015-07-16 16:05:27 |  | Local time is UTC +2 hours
2015-07-16 16:05:27 | AQUA@home | URL http://aqua.dwavesys.com/; Computer ID 23331; resource share 100
2015-07-16 16:05:27 | rosetta@home | URL http://boinc.bakerlab.org/rosetta/; Computer ID 1128410; resource share 100
2015-07-16 16:05:27 | Einstein@Home | URL http://einstein.phys.uwm.edu/; Computer ID 2030526; resource share 100
2015-07-16 16:05:27 | LHC@home 1.0 | URL http://lhcathomeclassic.cern.ch/sixtrack/; Computer ID 9809136; resource share 100
2015-07-16 16:05:27 | SETI@home | URL http://setiathome.berkeley.edu/; Computer ID 5057537; resource share 100
2015-07-16 16:05:27 | World Community Grid | URL http://www.worldcommunitygrid.org/; Computer ID 1010222; resource share 100
2015-07-16 16:05:27 | Einstein@Home | General prefs: from Einstein@Home (last modified 02-Jul-2015 20:41:28)
2015-07-16 16:05:27 | Einstein@Home | Computer location: home
2015-07-16 16:05:27 | Einstein@Home | General prefs: no separate prefs for home; using your defaults
2015-07-16 16:05:27 |  | Reading preferences override file
2015-07-16 16:05:27 |  | Preferences:
2015-07-16 16:05:27 |  | max memory usage when active: 8162.49MB
2015-07-16 16:05:27 |  | max memory usage when idle: 14692.48MB
2015-07-16 16:05:27 |  | max disk usage: 100.00GB
2015-07-16 16:05:27 |  | max CPUs used: 3
2015-07-16 16:05:27 |  | don't compute while active
2015-07-16 16:05:27 |  | don't use GPU while active
2015-07-16 16:05:27 |  | suspend work if non-BOINC CPU load exceeds 5%
2015-07-16 16:05:27 |  | (to change preferences, visit a project web site or select Preferences in the Manager)
2015-07-16 16:05:27 |  | Not using a proxy
2015-07-16 16:05:54 | AQUA@home | Fetching scheduler list
2015-07-16 16:06:06 | LHC@home 1.0 | Sending scheduler request: Requested by project.
2015-07-16 16:06:06 | LHC@home 1.0 | Not requesting tasks: don't need (CPU: job cache full; AMD/ATI GPU: )
2015-07-16 16:06:07 | LHC@home 1.0 | Scheduler request completed
2015-07-16 16:06:25 |  | Project communication failed: attempting access to reference site
2015-07-16 16:06:26 |  | Internet access OK - project servers may be temporarily down.
2015-07-16 16:29:52 | rosetta@home | Task foldit_2000862_1058_fold_SAVE_ALL_OUT_275242_646_0 exited with zero status but no 'finished' file
2015-07-16 16:29:52 | rosetta@home | If this happens repeatedly you may need to reset the project.
2015-07-16 16:37:01 | rosetta@home | Task foldit_2000862_1056_fold_SAVE_ALL_OUT_275241_649_0 exited with zero status but no 'finished' file
2015-07-16 16:37:01 | rosetta@home | If this happens repeatedly you may need to reset the project.
2015-07-16 16:50:01 | rosetta@home | Task foldit_2000862_1058_fold_SAVE_ALL_OUT_275242_646_0 exited with zero status but no 'finished' file
2015-07-16 16:50:01 | rosetta@home | If this happens repeatedly you may need to reset the project.
2015-07-16 16:54:03 | rosetta@home | Sending scheduler request: To fetch work.
2015-07-16 16:54:03 | rosetta@home | Requesting new tasks for AMD/ATI GPU
2015-07-16 16:54:04 | rosetta@home | Scheduler request completed: got 0 new tasks
2015-07-16 16:54:09 | SETI@home | Sending scheduler request: To fetch work.
2015-07-16 16:54:09 | SETI@home | Requesting new tasks for AMD/ATI GPU
2015-07-16 16:54:11 | SETI@home | Scheduler request completed: got 7 new tasks
2015-07-16 16:54:13 | SETI@home | Started download of 04fe15ac.8262.5549.438086664201.12.64
2015-07-16 16:54:13 | SETI@home | Started download of 04fe15ac.8262.5549.438086664201.12.68
2015-07-16 16:54:17 | SETI@home | Finished download of 04fe15ac.8262.5549.438086664201.12.64
2015-07-16 16:54:17 | SETI@home | Finished download of 04fe15ac.8262.5549.438086664201.12.68
2015-07-16 16:54:17 | SETI@home | Started download of 03jn15ae.24332.4586.438086664203.12.77
2015-07-16 16:54:17 | SETI@home | Started download of 04fe15ac.8262.5549.438086664201.12.129
2015-07-16 16:54:21 | SETI@home | Finished download of 03jn15ae.24332.4586.438086664203.12.77
2015-07-16 16:54:21 | SETI@home | Finished download of 04fe15ac.8262.5549.438086664201.12.129
2015-07-16 16:54:21 | SETI@home | Started download of 03jn15ae.24332.4586.438086664203.12.83
2015-07-16 16:54:21 | SETI@home | Started download of 03jn15ae.24332.4586.438086664203.12.85
2015-07-16 16:54:25 | SETI@home | Finished download of 03jn15ae.24332.4586.438086664203.12.83
2015-07-16 16:54:25 | SETI@home | Finished download of 03jn15ae.24332.4586.438086664203.12.85
2015-07-16 16:54:25 | SETI@home | Started download of 04fe15ac.8262.5549.438086664201.12.77
2015-07-16 16:54:30 | SETI@home | Finished download of 04fe15ac.8262.5549.438086664201.12.77
2015-07-16 16:54:59 | Einstein@Home | Message from task: 0
2015-07-16 16:54:59 | Einstein@Home | Computation for task PM0039_00161_8_1 finished
2015-07-16 16:54:59 | SETI@home | Starting task 03jn15ae.24332.4586.438086664203.12.83_1
2015-07-16 16:55:01 | Einstein@Home | Started upload of PM0039_00161_8_1_0
2015-07-16 16:55:01 | Einstein@Home | Started upload of PM0039_00161_8_1_1
2015-07-16 16:55:02 | Einstein@Home | Finished upload of PM0039_00161_8_1_0
2015-07-16 16:55:02 | Einstein@Home | Finished upload of PM0039_00161_8_1_1
2015-07-16 16:56:09 | rosetta@home | Task foldit_2000862_1056_fold_SAVE_ALL_OUT_275241_649_0 exited with zero status but no 'finished' file
2015-07-16 16:56:09 | rosetta@home | If this happens repeatedly you may need to reset the project.
2015-07-16 17:16:37 |  | Suspending computation - user request
ID: 63086 · Report as offensive
ProfileJord
Volunteer tester
Help desk expert
Avatar

Send message
Joined: 29 Aug 05
Posts: 15634
Netherlands
Message 63088 - Posted: 16 Jul 2015, 17:44:16 UTC - in response to Message 63086.  
Last modified: 16 Jul 2015, 18:14:51 UTC

2015-07-16 16:05:27 | Einstein@Home | URL http://einstein.phys.uwm.edu/; Computer ID 2030526; resource share 100

2015-07-16 16:05:27 | SETI@home | URL http://setiathome.berkeley.edu/; Computer ID 5057537; resource share 100

As I expected, you're running work on your ATI GPU, from both Einstein and Seti. This will cause the problems you see with regards to slowness, refresh rates, etc. Simply solved by setting the preference for the GPU to only run when the system is idle (you away from keyboard but computer still on).

Edit: To do so, open BOINC Manager, (Tools, Advanced view), Tools, Computing preferences..., uncheck Use GPU while computer is in use, click OK.
ID: 63088 · Report as offensive
Tomas

Send message
Joined: 17 Mar 09
Posts: 8
Sweden
Message 63089 - Posted: 16 Jul 2015, 18:36:21 UTC
Last modified: 16 Jul 2015, 18:38:47 UTC

That one is unchecked.
Boinc is only supposed to run:
When computer is not on batteries (well, since it's an desktop, so...)
When the computer is NOT used.
The gpu is not allowed to be used while the computer is in use
It has to be idle for 3 minutes
Less than 5% CPU

No time restrictions nor any day of week restrictions.
Switch task every 60 minutes
25% of the processors is allowed and 25% CPU-time is allowed.
Now what have I missed.

It seems that boinc doesn't bother about some of the settings.
Strange thing, it only affects one of the connected mices.
The only one affected is th MS one, the logitech one is not affected
The MS is wireless, and the logitech is cabled.
ID: 63089 · Report as offensive
Claggy

Send message
Joined: 23 Apr 07
Posts: 1112
United Kingdom
Message 63090 - Posted: 16 Jul 2015, 20:12:49 UTC - in response to Message 63086.  
Last modified: 16 Jul 2015, 20:31:29 UTC

I somehow suspect you're screwed up your Boinc installation somehow, probably some of the slot permissions aren't set correctly:

2015-07-16 16:05:27 | | Data directory: D:\BOINC\Data
2015-07-16 16:05:27 | | Running under account Tomas
2015-07-16 16:05:27 | | CAL: ATI GPU 0: ATI Radeon HD 5800/5900 series (Cypress/Hemlock) (CAL version 1.4.1848, 1024MB, 991MB available, 5600 GFLOPS peak)
2015-07-16 16:05:27 | | OpenCL: AMD/ATI GPU 0: ATI Radeon HD 5800/5900 series (Cypress/Hemlock) (driver version 1800.5 (VM), device version OpenCL 1.2 AMD-APP (1800.5), 1024MB, 991MB available, 5600 GFLOPS peak)
2015-07-16 16:05:27 | | OpenCL CPU: Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz (OpenCL driver vendor: Advanced Micro Devices, Inc., driver version 1800.5 (sse2,avx), device version OpenCL 1.2 AMD-APP (1800.5))
2015-07-16 16:05:27 | | Host name: TOYBOX
2015-07-16 16:05:27 | | Processor: 12 GenuineIntel Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz [Family 6 Model 62 Stepping 4]
2015-07-16 16:05:27 | | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 popcnt aes f16c rdrandsyscall nx lm avx vmx tm2 dca pbe fsgsbase smep
2015-07-16 16:05:27 | | OS: Microsoft Windows 7: Ultimate x64 Edition, Service Pack 1, (06.01.7601.00)
2015-07-16 16:05:27 | | Memory: 15.94 GB physical, 31.88 GB virtual
2015-07-16 16:05:27 | | Disk: 500.00 GB total, 346.21 GB free
2015-07-16 16:05:27 | | Local time is UTC +2 hours
2015-07-16 16:05:27 | AQUA@home | URL http://aqua.dwavesys.com/; Computer ID 23331; resource share 100
2015-07-16 16:05:27 | rosetta@home | URL http://boinc.bakerlab.org/rosetta/; Computer ID 1128410; resource share 100
2015-07-16 16:05:27 | Einstein@Home | URL http://einstein.phys.uwm.edu/; Computer ID 2030526; resource share 100
2015-07-16 16:05:27 | LHC@home 1.0 | URL http://lhcathomeclassic.cern.ch/sixtrack/; Computer ID 9809136; resource share 100
2015-07-16 16:05:27 | SETI@home | URL http://setiathome.berkeley.edu/; Computer ID 5057537; resource share 100
2015-07-16 16:05:27 | World Community Grid | URL http://www.worldcommunitygrid.org/; Computer ID 1010222; resource share 100
2015-07-16 16:05:27 | Einstein@Home | General prefs: from Einstein@Home (last modified 02-Jul-2015 20:41:28)
2015-07-16 16:05:27 | Einstein@Home | Computer location: home
2015-07-16 16:05:27 | Einstein@Home | General prefs: no separate prefs for home; using your defaults
2015-07-16 16:05:27 | | Reading preferences override file
2015-07-16 16:05:27 | | Preferences:
2015-07-16 16:05:27 | | max memory usage when active: 8162.49MB
2015-07-16 16:05:27 | | max memory usage when idle: 14692.48MB
2015-07-16 16:05:27 | | max disk usage: 100.00GB
2015-07-16 16:05:27 | | max CPUs used: 3
2015-07-16 16:05:27 | | don't compute while active
2015-07-16 16:05:27 | | don't use GPU while active
2015-07-16 16:05:27 | | suspend work if non-BOINC CPU load exceeds 5%
2015-07-16 16:05:27 | | (to change preferences, visit a project web site or select Preferences in the Manager)
2015-07-16 16:05:27 | | Not using a proxy
2015-07-16 16:05:54 | AQUA@home | Fetching scheduler list
2015-07-16 16:06:06 | LHC@home 1.0 | Sending scheduler request: Requested by project.
2015-07-16 16:06:06 | LHC@home 1.0 | Not requesting tasks: don't need (CPU: job cache full; AMD/ATI GPU: )
2015-07-16 16:06:07 | LHC@home 1.0 | Scheduler request completed
2015-07-16 16:06:25 | | Project communication failed: attempting access to reference site
2015-07-16 16:06:26 | | Internet access OK - project servers may be temporarily down.
2015-07-16 16:29:52 | rosetta@home | Task foldit_2000862_1058_fold_SAVE_ALL_OUT_275242_646_0 exited with zero status but no 'finished' file
2015-07-16 16:29:52 | rosetta@home | If this happens repeatedly you may need to reset the project.
2015-07-16 16:37:01 | rosetta@home | Task foldit_2000862_1056_fold_SAVE_ALL_OUT_275241_649_0 exited with zero status but no 'finished' file
2015-07-16 16:37:01 | rosetta@home | If this happens repeatedly you may need to reset the project.
2015-07-16 16:50:01 | rosetta@home | Task foldit_2000862_1058_fold_SAVE_ALL_OUT_275242_646_0 exited with zero status but no 'finished' file
2015-07-16 16:50:01 | rosetta@home | If this happens repeatedly you may need to reset the project.
2015-07-16 16:54:03 | rosetta@home | Sending scheduler request: To fetch work.
2015-07-16 16:54:03 | rosetta@home | Requesting new tasks for AMD/ATI GPU
2015-07-16 16:54:04 | rosetta@home | Scheduler request completed: got 0 new tasks
2015-07-16 16:54:09 | SETI@home | Sending scheduler request: To fetch work.
2015-07-16 16:54:09 | SETI@home | Requesting new tasks for AMD/ATI GPU
2015-07-16 16:54:11 | SETI@home | Scheduler request completed: got 7 new tasks
2015-07-16 16:54:13 | SETI@home | Started download of 04fe15ac.8262.5549.438086664201.12.64
2015-07-16 16:54:13 | SETI@home | Started download of 04fe15ac.8262.5549.438086664201.12.68
2015-07-16 16:54:17 | SETI@home | Finished download of 04fe15ac.8262.5549.438086664201.12.64
2015-07-16 16:54:17 | SETI@home | Finished download of 04fe15ac.8262.5549.438086664201.12.68
2015-07-16 16:54:17 | SETI@home | Started download of 03jn15ae.24332.4586.438086664203.12.77
2015-07-16 16:54:17 | SETI@home | Started download of 04fe15ac.8262.5549.438086664201.12.129
2015-07-16 16:54:21 | SETI@home | Finished download of 03jn15ae.24332.4586.438086664203.12.77
2015-07-16 16:54:21 | SETI@home | Finished download of 04fe15ac.8262.5549.438086664201.12.129
2015-07-16 16:54:21 | SETI@home | Started download of 03jn15ae.24332.4586.438086664203.12.83
2015-07-16 16:54:21 | SETI@home | Started download of 03jn15ae.24332.4586.438086664203.12.85
2015-07-16 16:54:25 | SETI@home | Finished download of 03jn15ae.24332.4586.438086664203.12.83
2015-07-16 16:54:25 | SETI@home | Finished download of 03jn15ae.24332.4586.438086664203.12.85
2015-07-16 16:54:25 | SETI@home | Started download of 04fe15ac.8262.5549.438086664201.12.77
2015-07-16 16:54:30 | SETI@home | Finished download of 04fe15ac.8262.5549.438086664201.12.77
2015-07-16 16:54:59 | Einstein@Home | Message from task: 0
2015-07-16 16:54:59 | Einstein@Home | Computation for task PM0039_00161_8_1 finished
2015-07-16 16:54:59 | SETI@home | Starting task 03jn15ae.24332.4586.438086664203.12.83_1
2015-07-16 16:55:01 | Einstein@Home | Started upload of PM0039_00161_8_1_0
2015-07-16 16:55:01 | Einstein@Home | Started upload of PM0039_00161_8_1_1
2015-07-16 16:55:02 | Einstein@Home | Finished upload of PM0039_00161_8_1_0
2015-07-16 16:55:02 | Einstein@Home | Finished upload of PM0039_00161_8_1_1
2015-07-16 16:56:09 | rosetta@home | Task foldit_2000862_1056_fold_SAVE_ALL_OUT_275241_649_0 exited with zero status but no 'finished' file
2015-07-16 16:56:09 | rosetta@home | If this happens repeatedly you may need to reset the project.
2015-07-16 17:16:37 | | Suspending computation - user request


In June the Seti v7 v7.03 r1831 app was failing to build it's compilations:

<core_client_version>7.4.42</core_client_version>
<![CDATA[
<message>
(unknown error) - exit code -1073741819 (0xc0000005)
</message>
<stderr_txt>
Running on device number: 0
Priority of worker thread raised successfully
Priority of process adjusted successfully, below normal priority class used
OpenCL platform detected: Advanced Micro Devices, Inc.
BOINC assigns device 0
Info: BOINC provided device ID used

Build features: SETI7 Non-graphics OpenCL USE_OPENCL_HD5xxx OCL_ZERO_COPY OCL_CHIRP3 FFTW AMD specific USE_SSE x86
CPUID: AMD Phenom(tm) II X4 810 Processor

Cache: L1=64K L2=512K

CPU features: FPU TSC PAE CMPXCHG8B APIC SYSENTER MTRR CMOV/CCMP MMX FXSAVE/FXRSTOR SSE SSE2 HT SSE3
OpenCL-kernels filename : MultiBeam_Kernels_r1831.cl
INFO: can't open binary kernel file: D:\BOINC\Data/projects/setiathome.berkeley.edu\MultiBeam_Kernels_r1831.clHD5_ATIRV770.bin_V7, continue with recompile...


Unhandled Exception Detected...


Late June the Seti v7 v7.03 app was running correctly (Note this app had api Bug where it didn't suspend properly when it was supposed to, ie when in use).

Beginning of July the Seti v7 7.00 CPU app was failing to even run:

<core_client_version>7.4.42</core_client_version>
<![CDATA[
<message>
too many exit(0)s
</message>
]]>


Over the last couple of days you're completed a couple of Seti v7 v7.07 and AP v7 7.09 tasks O.K,
But you then errored a Seti v7 7.07 task with a too large a finish file, where the app completed the Wu, then restarted it:

<core_client_version>7.4.42</core_client_version>
<![CDATA[
<message>
finish file present too long
</message>
<stderr_txt>
Running on device number: 0
Priority of worker thread raised successfully
Priority of process adjusted successfully, below normal priority class used
OpenCL platform detected: Advanced Micro Devices, Inc.
BOINC assigns device 0
0 slot of 64 used for this instance
Info: BOINC provided OpenCL device ID used
Info: CPU affinity mask used: 1

Build features: SETI7 Non-graphics OpenCL OCL_ZERO_COPY OCL_CHIRP3 FFTW AMD specific USE_SSE2 x86
CPUID: Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz

Cache: L1=64K L2=256K

CPU features: FPU TSC PAE CMPXCHG8B APIC SYSENTER MTRR CMOV/CCMP MMX FXSAVE/FXRSTOR SSE SSE2 HT SSE3 SSSE3 SSE4.1 SSE4.2 AVX
OpenCL-kernels filename : MultiBeam_Kernels_r2929.cl
ar=0.425574 NumCfft=196337 NumGauss=1110658134 NumPulse=226383465864 NumTriplet=452769552346
Currently allocated 145 MB for GPU buffers
In v_BaseLineSmooth: NumDataPoints=1048576, BoxCarLength=8192, NumPointsInChunk=32768

Windows optimized S@H v7 application
Based on Intel, Core 2-optimized v8-nographics V5.13 by Alex Kan
SSE2xj Win32 Build 2929 , Ported by : Raistmer, JDWhale

SETI7 update by Raistmer

OpenCL version by Raistmer, r2929

Number of OpenCL platforms: 1


OpenCL Platform Name: AMD Accelerated Parallel Processing
Number of devices: 1
Max compute units: 20
Max work group size: 256
Max clock frequency: 875Mhz
Max memory allocation: 536870912
Cache type: None
Cache line size: 0
Cache size: 0
Global memory size: 1073741824
Constant buffer size: 65536
Max number of constant args: 8
Local memory type: Scratchpad
Local memory size: 32768
Queue properties:
Out-of-Order: No
Name: Cypress
Vendor: Advanced Micro Devices, Inc.
Driver version: 1800.5 (VM)
Version: OpenCL 1.2 AMD-APP (1800.5)
Extensions: cl_khr_fp64 cl_amd_fp64 cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_gl_sharing cl_ext_atomic_counters_32 cl_amd_device_attribute_query cl_amd_vec3 cl_amd_printf cl_amd_media_ops cl_amd_media_ops2 cl_amd_popcnt cl_khr_d3d10_sharing cl_khr_d3d11_sharing cl_khr_dx9_media_sharing cl_amd_image2d_from_buffer_read_only cl_khr_spir cl_khr_gl_event


Work Unit Info:
...............
Credit multiplier is : 2.85
WU true angle range is : 0.425574
Used GPU device parameters are:
Number of compute units: 20
Single buffer allocation size: 64MB
Total device global memory: 1024MB
max WG size: 256
local mem type: Real
period_iterations_num=20
Pulse: peak=7.422889, time=12.66, period=3.006, d_freq=1420813941.91, score=1.027, chirp=-1.5102, fft_len=512
Pulse: peak=4.428377, time=12.62, period=1.457, d_freq=1420807267.12, score=1.02, chirp=-72.501, fft_len=128
GPU device sync requested... ...GPU device synched
Termination request detected or computations are finished. GPU device synched, exiting...
Running on device number: 0
Priority of worker thread raised successfully
Priority of process adjusted successfully, below normal priority class used
OpenCL platform detected: Advanced Micro Devices, Inc.
BOINC assigns device 0
0 slot of 64 used for this instance
Info: BOINC provided OpenCL device ID used
Info: CPU affinity mask used: 1

Build features: SETI7 Non-graphics OpenCL OCL_ZERO_COPY OCL_CHIRP3 FFTW AMD specific USE_SSE2 x86
CPUID: Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz

Cache: L1=64K L2=256K

CPU features: FPU TSC PAE CMPXCHG8B APIC SYSENTER MTRR CMOV/CCMP MMX FXSAVE/FXRSTOR SSE SSE2 HT SSE3 SSSE3 SSE4.1 SSE4.2 AVX
OpenCL-kernels filename : MultiBeam_Kernels_r2929.cl
ar=0.425574 NumCfft=196337 NumGauss=1110658134 NumPulse=226383465864 NumTriplet=452769552346
Currently allocated 145 MB for GPU buffers
In v_BaseLineSmooth: NumDataPoints=1048576, BoxCarLength=8192, NumPointsInChunk=32768
Restarted at 65.96 percent.
Used GPU device parameters are:
Number of compute units: 20
Single buffer allocation size: 64MB
Total device global memory: 1024MB
max WG size: 256
local mem type: Real
period_iterations_num=20
Gaussian: peak=3.287644, mean=0.4949521, ChiSq=1.402161, time=71.3, d_freq=1420807894.54,
score=3.517837, null_hyp=2.428879, chirp=-85.807, fft_len=16k
Gaussian: peak=3.266581, mean=0.5138665, ChiSq=1.366966, time=74.66, d_freq=1420807606.62,
score=1.43418, null_hyp=2.300431, chirp=-85.807, fft_len=16k

Best spike: peak=23.71555, time=60.4, d_freq=1420811926.54, chirp=5.1731, fft_len=128k
Best autocorr: peak=17.15968, time=87.24, delay=2.5464, d_freq=1420812926.87, chirp=27.28, fft_len=128k
Best gaussian: peak=3.287644, mean=0.4949521, ChiSq=1.402161, time=71.3, d_freq=1420807894.54,
score=3.517837, null_hyp=2.428879, chirp=-85.807, fft_len=16k
Best pulse: peak=7.422889, time=12.66, period=3.006, d_freq=1420813941.91, score=1.027, chirp=-1.5102, fft_len=512
Best triplet: peak=0, time=-2.123e+011, period=0, d_freq=0, chirp=0, fft_len=0


Flopcounter: 21485002350251.977000

Spike count: 0
Autocorr count: 0
Pulse count: 2
Triplet count: 0
Gaussian count: 2
Wallclock time elapsed since last restart: 197.5 seconds

class Gaussian_transfer_not_needed: total=21970, N=21970, <>=1, min=1 max=1
class Gaussian_transfer_needed: total=1, N=1, <>=1, min=1 max=1


class Gaussian_skip1_no_peak: total=0, N=0, <>=0, min=0 max=0
class Gaussian_skip2_bad_group_peak: total=0, N=0, <>=0, min=0 max=0
class Gaussian_skip3_too_weak_peak: total=0, N=0, <>=0, min=0 max=0
class Gaussian_skip4_too_big_ChiSq: total=0, N=2, <>=0, min=0 max=0
class Gaussian_skip6_low_power: total=0, N=2, <>=0, min=0 max=0


class Gaussian_new_best: total=1, N=1, <>=1, min=1 max=1
class Gaussian_report: total=2, N=2, <>=1, min=1 max=1
class Gaussian_miss: total=0, N=0, <>=0, min=0 max=0


class PC_triplet_find_hit: total=5434, N=5434, <>=1, min=1 max=1
class PC_triplet_find_miss: total=54, N=54, <>=1, min=1 max=1


class PC_pulse_find_hit: total=2746, N=2746, <>=1, min=1 max=1
class PC_pulse_find_miss: total=0, N=0, <>=0, min=0 max=0
class PC_pulse_find_early_miss: total=0, N=0, <>=0, min=0 max=0
class PC_pulse_find_2CPU: total=0, N=0, <>=0, min=0 max=0


class PoT_transfer_not_needed: total=5434, N=5434, <>=1, min=1 max=1
class PoT_transfer_needed: total=54, N=54, <>=1, min=1 max=1

GPU device sync requested... ...GPU device synched
17:30:20 (7436): called boinc_finish(0)
Running on device number: 0
Priority of worker thread raised successfully
Priority of process adjusted successfully, below normal priority class used
OpenCL platform detected: Advanced Micro Devices, Inc.
BOINC assigns device 0
0 slot of 64 used for this instance
Info: BOINC provided OpenCL device ID used
Info: CPU affinity mask used: 1

Build features: SETI7 Non-graphics OpenCL OCL_ZERO_COPY OCL_CHIRP3 FFTW AMD specific USE_SSE2 x86
CPUID: Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz

Cache: L1=64K L2=256K

CPU features: FPU TSC PAE CMPXCHG8B APIC SYSENTER MTRR CMOV/CCMP MMX FXSAVE/FXRSTOR SSE SSE2 HT SSE3 SSSE3 SSE4.1 SSE4.2 AVX
OpenCL-kernels filename : MultiBeam_Kernels_r2929.cl
ar=0.425574 NumCfft=196337 NumGauss=1110658134 NumPulse=226383465864 NumTriplet=452769552346
Currently allocated 145 MB for GPU buffers
In v_BaseLineSmooth: NumDataPoints=1048576, BoxCarLength=8192, NumPointsInChunk=32768
Restarted at 76.34 percent.
Used GPU device parameters are:
Number of compute units: 20
Single buffer allocation size: 64MB
Total device global memory: 1024MB
max WG size: 256
local mem type: Real
period_iterations_num=20
GPU device sync requested... ...GPU device synched
Termination request detected or computations are finished. GPU device synched, exiting...

</stderr_txt>


Try doing a Boinc repair installation (rerun the installer), and/or a fresh Boinc Installation, and maybe Boinc 7.6.6,
also try not to use the '25% CPU-time' setting, try 100%, and let it suspend when in use, and greater than 5% CPU instead.

And to reforce all that, the rosetta app can't start:

<core_client_version>7.4.42</core_client_version>
<![CDATA[
<message>
couldn't start app: Can't write init file: fopen() failed
</message>
]]>


Claggy
ID: 63090 · Report as offensive

Message boards : Questions and problems : 7.4.42 (X64) -> unusable computer

Copyright © 2025 University of California.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.